You are here: Home » News » news » How To Maintain The Bottle Filling Machine?

How To Maintain The Bottle Filling Machine?

Views: 0     Author: Site Editor     Publish Time: 2022-02-16      Origin: Site


facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
sharethis sharing button

In many enterprise factories, bottle filling machines are used. However, the bottle filling machine is consumed after long-term use and needs to be maintained. But the enterprise factory may not know very well, so here is an introduction to the maintenance of the bottle filling machine, and at the same time introduce other related knowledge of the bottle filling machine. I hope it will be helpful to you after reading this article.

l Maintenance of the bottle filling machine.

l Bottle filling machine products provided by the company.

Bottle filling machine maintenance

First, before using the bottle filling machine:

1. Install and then debug, read the manual carefully before debugging, and prepare the tools used.

2. After the filling machine, bottle washing machine and bottle washing machine are installed, adjust the filling track and the bottle receiving tray to a level, the liquid storage tank is full of materials, and all electrical switches are in the off position.

3. Insert the filled container into the tooling box and turn on the external power supply. The power socket must be a three-pin socket with a reliable grounding wire to prevent people from being shocked by the shell leakage. Turn the machine power switch to ON and the power indicator light is on.

4. The rack support plate will hold the filling rack and push the positioning sleeve on the filling head upward with your finger. The positioning sleeve should be able to move up and down flexibly, and the filling needle in it is exposed or retracted without hindrance.

5. Turn the switch under the liquid storage barrel to the open position, so that the material can flow into the total metering pump. According to the total volume of each container filling, adjust the screw on the crank and turn the knob of the filling speed control plate to 20 degrees. Left and right, and then turn the switch on the filling speed control board to the on position.

6. When the liquid flowing out of the filling head is the set amount, tighten the liquid volume fine-tuning nut, cover the shell of the filling head, and loosen the supporting plate of the filling rack.

After the bottle filling machine is used, pay attention to its maintenance. When disassembling and washing the piston and when maintaining, remove the fixing screws at the same time, so as not to affect the process requirements of the other when disassembling the first one. Before the piston bottle filling machine is cleaned, the remaining product should be cleaned up, and then the tank should be filled with gentle cleaning fluid. The cylinder has been lubricated before leaving the factory. Please do not open or add any lubricating oil to ensure that the surface of the bottle filling machine is clean and hygienic. Power off when it is not working. In addition, while maintaining and using the bottle filling machine correctly, it is also necessary to conduct regular inspections and debugging. Only in this way can the bottle filling machine work healthily and stably.

With the continuous improvement of living standards, people's demand for beverages and daily chemical products continues to increase, enterprises continue to develop, and the use of bottle filling machines is increasing. The problems that should be paid attention to in the use of bottle filling machines are becoming increasingly acute. Therefore, In order for the company to produce better, its maintenance is still very necessary.

Bottle filling machine products provided by the company.

Our company (Vaisi) has a wide range of bottle filling machines. Mainly include pharmaceutical liquid bottle filling machine, automatic liquid bottle filling machine, small pharmaceutical liquid bottle filling machine, wine bottle filling machine and other bottle filling machine products. If you have a need to buy a bottle filling machine, you can consider our company (Vaisi).

Welcome to our company (Vaisi) to purchase bottle filling machine and disposable gloves products, we will provide you with the best bottle filling machine products and services, and look forward to your visit. Finally, I wish you success in your work and good health.

Weis Industrial Co. Ltd

Weis Industrial Company Limited is strategically located in Suzhou City, Jiangsu Province. A humble beginning way back in 2010, approximately an hour drive from Shanghai. 

“Quality, Service, More Value for Customer” is the sprite of Weis Industrial Co. Ltd. seeking.

Follow Us

  0086-512-58976188 


  Industry Zone of Jinfeng Town, Zhangjiagang City, Jiangsu China.