How To Use A Labeling Machine?

Labeling machines have been used in many companies and enterprises. However, employees may not fully understand the labeling machine. In this article, the relevant knowledge of the labeling machine will be introduced to a certain extent, including how to use the labeling machine. I hope that after reading this article, the information obtained is helpful to you.

l How to use the labeling machine?

l Labeling machine products provided by the company.

How to use the labeling machine?

1. The environment before the labeling machine is used:

l The ambient temperature is relatively dry.

l Places with less dust.

l There is no place where water, oil, or chemicals splash.

l Do not use in places with explosive, flammable and dangerous materials.

2. Preparation before using the labeling machine:

1. Check that the current and voltage are normal.

2. Check that there is no foreign matter in the conveyor belt, labeling head, machine, etc.

3. Adjust before starting the labeling machine:

1. Adjust the height, horizontal position and angle of the labeling head to a suitable position.

2. Adjust the paper pulling and pressing wheel to make the label paper close to the label peeling board.

3. Adjust the position of the bottle-separating mechanism so that it is just a little wider than holding a middle barrel.

4. Adjust the two handwheels on the top of the guide roller to make the guide roller close to the middle barrel

Four, boot

1. Turn on the main power switch.

2. Turn on the power switch on the left side of the labeling machine.

3. After the labeling machine is turned on, enter the password on the touch screen to enter the system.

4. After the label paper is installed on the labeling machine, various parameters can be adjusted through the touch screen.

5. Debug the position of the electric eye of the object to be measured, and adjust the sensitivity of the electric eye of the target.

6. Adjust the suitable speed.

7. Adjust the labeling position to ensure that the label peeling part is aligned with the labeling position.

8. Press the run button, the system runs.

9. Remember to turn off and power off the labeling machine after normal use.

Five, shutdown

1. Press the stop button on the touch screen to stop the system.

2. Turn off the power switch on the left side of the labeling machine.

3. Turn off the main power switch.

Labeling machine products provided by the company.

Our company (WEIS) has a wide range of products. Mainly include plastic gloves, bottling machine, filling machine, sealing machine, labeling machine, preform, palletizing system, etc. Among them, there are many types of labeling machines. You can come to our company to check the labeling machine. If there is a labeling machine product that suits your needs, you can buy it. We will provide you with the best labeling machine products and services.

If you want to buy labeling machines and filling system other products, you can consider our company (WEIS). Welcome to our company to buy labeling machine products, we will provide you with the best labeling machine products and services. We look forward to your visit. Finally, I wish you success at work, good health and a happy family.