How Do You Use A Glass Bottle Filler?

Glass bottle fillers are used in many companies and enterprises. However, employees may not fully understand the glass bottle filler. In this article, the relevant knowledge of the glass bottle filler will be introduced to a certain extent, including how to use the glass bottle filler. I hope that after browsing this article, the information you have obtained is helpful to you.

l Use of glass bottle filler.

l Disinfect and rinse.

l The glass bottle filler products provided by the company.

Use of glass bottle filler.

1. Because the glass bottle filler is an automated machine, the dimensions of easy-pull bottles, bottle pads, and bottle caps are required to be uniform.

2. Before driving, you must use the crank handle to turn the machine to see if there is any abnormality in the rotation, and then you can drive after it is confirmed that it is normal.

3. When adjusting the machine, use proper tools. It is strictly forbidden to use excessive tools or excessive force to disassemble parts to avoid damage to the machine parts or affect the performance of the machine.

4. When the machine is adjusted, be sure to tighten the loose screws, and use the shake handle to turn the machine to check whether the action meets the requirements before driving.

5. The glass bottle filler must be kept clean. It is strictly forbidden to have oil stains, liquid medicine or glass fragments on the machine to avoid damage to the machine. Therefore, it must:

⑴During the production process of the machine, remove the liquid medicine or glass fragments in time.

⑵ Clean the surface of the machine once before the shift, and add clean lubricating oil to each activity department.

⑶ The glass bottle filler should be scrubbed once a week, especially the places that are not easy to clean in normal use or blown with compressed air.

Disinfect and rinse.

1. Loosen the upper and lower set screws, disassemble the liquid injection system for overall disinfection, or disassemble for disinfection and cleaning separately.

2. Put the liquid inlet pipe in the cleaning liquid and start the cleaning.

3. The 500ml model may have errors in actual filling, so the measuring cylinder should be accurate before the formal filling.

4. Needle tube for glass bottle filler, standard 5ml or 10ml syringe for type 10, 20ml glass filler for type 20, and 100ml glass filler for type 100.

The glass bottle filler products provided by the company.

Our company (WEIS) has a wide range of products. Mainly include plastic gloves, bottling machines, fillers, sealing machines, labeling machines, preforms, palletizing systems, etc. Among them, fillers include glass bottle fillers. You can come to our company to check the glass bottle filler. If there is a glass bottle filler product that suits your wishes, you can buy it. We will provide you with the best glass bottle filler products and services.

If you want to buy products such as glass bottle fillers and blowing system products, you can consider our company (WEIS). You are welcome to come to our company to purchase glass bottle filler products, we will provide you with the best glass bottle filler products and services. We are looking forward to your visit. Finally, I wish you success in your work, good health and happy family.