You are here: Home » Products » liquid filling machine » Tri-block Blow-fill-cap Filler

PRODUCT DETAIL

Tri-block Blow-fill-cap Filler

Name: Tri-block Blow-fill-cap Filler
Brand: WEIS
Rating: 5.0 (31 reviews)

BFC10-40-10 blowing filling capping machine is used to pack liquid into plastic bottle, such as water, juice, edible oil, CSD, etc., it is new concept using in bottling package industrial. The speed is 18000BPH based on 500ml bottle.

Quantity:
Availability:





Inquire Add to Basket

Model:
BFC10-40-10
Brand:
WEIS

Product Description

BFC10-40-10 blowing filling capping machine is used to pack liquid into plastic bottle, such as water, juice, edible oil, CSD, etc., it is new concept using in bottling package industrial. The speed is 18000BPH based on 500ml bottle. It has blowing unit, filling unit, capping unit, transportation system and controlling system. it replace traditional configuration, which is blow molding machine plus air conveyor and washing filling capping machine. Save energy and space for beverage bottling manufacturer. It is suitable for space limitation of food and beverage manufacturing plants.

Technics Flow Chart

PET bottle pre-form		Auto sending device		Inlet star wheel
	Heating stove heats pre-forms		Taking pre-form manipulator
Main blowing wheel mold		Main blowing wheel sealing、extrude、twice blowing、formed		Taking bottle manipulator
	Conveying bottle device		Filling and capping machine

Main configuration:

No.	Description	Brand	Country
Blowing unit
1	Main motor	SEW	Germany
2	Inverter	Schneider	France
3	PLC controlling software	Schneider	France
4	Programmable controlled	Schneider	France
5	Operation center	Schneider	France
6	Low pressure electrical	Schneider	France
7	Infrared heating lamp	Toshiba	Japan
8	Infrared temperature checker	OPTEX	Japan
9	Encoder	KOYO	Japan
10	Limit switch	Schneider	France
11	Photoelectric switch	OPTEX	Japan
12	Approaching switch	Schneider	France
13	Middle relay	Schneider	France
14	Air plug	HARTING	Germany
15	Torque Clutch	MAYR	Germany
16	Action control solenoid valve	NORGREN	British
17	High pressure solenoid valve	NORGREN	British
18	Tension Cylinder	NORGREN	British
19	Air filter device	NORGREN	British
Filling and capping unit
1	Material of filling valve	SS304	CHINA
2	Material of rinse and rotary plate, machine table	stainless steel 304	CHINA
3	Main Motor	SEW	Germany
4	Frequency exchanger	Schneider	France
5	PLC	Schneider	France
6	Touch screen	Schneider	France
7	Contactor	SCHNEIDER	Germany
8	Thermal relay	SCHNEIDER	Germany
9	Air switch	SCHNEIDER	Germany
10	Proximity switch	TURCK	Germany
11	Photoelectric switch	BANNER	USA

https://youtu.be/4PPib3bv4x0

Parameter:

PRODUCTION DATA	UNIT	BFC 10-40-10
Mold cavities	N	10
Max. body diameter	mm	110
Max. Height	mm	320
Max neck diameter	mm	30
Max. preform Height	mm	145
Max. volume	ml	2000
Capacity (500ml water bottle)	BPH	18000
Filling heads	PC	40
Capping heads	PC	10
Rate of finished product(*)	%	≥99.5
POWER SUPPLY
Voltage	V	380
Frequency	Hz	50/60
Voltage permitted		+/-5%
Frequency permitted		+/-1%
Auxiliary voltage	V DC	24
Distribution		3PH + N + PE
Cos ∮		0.9
BASE MOULD
Water inlet temperature (**)	℃	8～10
Water inlet pressure (**)	bar	4～6
power (**)	kW	4
MOULD BODY
Water inlet temperature (**)	℃	10～15
Water inlet pressure (**)	bar	4～6
Power (**)	kW	5
LOW COMPRESSED AIR
Nominal pressure	bar	Provided by high pressure recycling system (save cost of lower compressor and power consumption)
Air supply (**)	m3/min
Filtering grade (filter)	micron
Humidity		Dehumidified
HIGH COMPRESSED AIR
Nominal pressure	bar	35-40
Filtering grade(filter)	micron	0.01
Humidity		Dehumidified
Oil content		Free